IndianAftermarket.com

"Thunder Works" Mini Floorboards for Scout

These floorboards were developed after many prototypes were tested. They are not flat to the ground. They mount with a slight upward angle. This was found to be much more comfortable on the Scout, yet allowed shifting to remain easy. Adapting to Polaris the floorboards have been changed again. They now are about 7/8" lower than the pegs. This will give you room for your toe to fit under the shifter peg. Since the boards are thin at the outer edge they still rub and fold (on a lean) about the same as the pegs. There is nothing else to buy. This comes with everything you need to install and use. They make cruising many times more comfortable compared to using pegs.  The boards measure 4 x 8 inches and are about 3/8" thick at the outer edge.



$239.95 Chrome floorboards (shipping $13.95) #9001-L  (lowered 7/8")




$269.95 Mini Floorboards for Scout  Chrome part #9001 (shipping $13.95) These are lowered 1/4" and are for people that wear men's shoe size 8 or less. The toe shifter clearance will be tight but if you need the normal height of the pegs this will work.


$279.95 Mini Floorboards for Scout (All Black)

part #9001-B (shipping $13.95) These are lowered 1/4" and are for people that wear men's shoe size 8 or less. The toe shifter clearance will be tight but if you need the normal height of the pegs this will work.


$269.95 Black floorboards (shipping $13.95) #9001-BL  (lowered 7/8")


This video shows you how to install the NON-lowered mini floorboards but it is the same for the lowered boards.

This video shows how we cast molten aluminum to make the adaptor brackets.